MITSUBISHI ELECTRIC PE-15MYC - Manual (Page 110)

- 109 -
1
A
Operation mode display A
1-2 Selecting operation
When selecting operation
Press the [MODE] button
Consecutive press of the [MODE] button switches the operation
over to "FAN", "COOL", "HEAT" and
"AUTO". For the contents
of operation,check the display.
For fan
Press the [MODE] button and bring up the "FAN"
display.
* The fan operation functions to circulate the air in the room.
* The temperature of the room cannot be set by fan operation.
Caution:
Never expose your body directly to cool air for a long time.
Excessive exposure to cool air is bad for your health, and
should therefore be avoided.
For cooling
Press the [MODE] button and bring up the "COOL" display.
For heating
Press the [MODE] button and bring up the "HEAT" display.
Caution:
* When the air conditioner is used together with burners, thoroughly
ventilate the area. Insufficient ventilation can result in accidents due to oxygen deficiency.
* Never place a burner at a place where it is exposed to the airflow from the air conditioner.
Doing so can result in imperfect combustion of the burner.
For Auto change over
Press the [MODE]button and bring up the "AUTO" display
This function is special order. Please consult your local Mitsubishi Electric Sales office for application
advice on this function.
Because this function need low ambient cooling parts as option.
Indoor temperature can be set within the following range.
Indoor temperature setting range:17
~
30˚C
1-3 Room temperature adjustment
1
A
Set temperature display and room
temperature display A
To change room temperature
1 Press the room temperature button and set the room tempe-
rature of your choice.
Press and together, the unit of temperature
change " " (degree-centigrade) and " " (degree-Fahren-
heit)
Press or once changes the setting by 1 .
If the pressing is continued, the setting continues to change by 1 .
* Indoor temperature can be set within the following range.
Cooling 19 30
Heating 17 28
* It is impossible to set the room temperature by the air-blow
operation
1
F