Memorex MLT1522 - Manual (Page 14)

13
COMPUTER CONNECTION
Follow the instructions below to connect a computer to your television/monitor. (CABLES NOT INCLUDED.)
VIEWING ANGLE ADJUSTMENT
This unit is designed to allow you to have a comfortable viewing angle, which can be adjusted from –5°
to +25°.
NOTE: Do not force the LCD monitor over its maximum viewing angle settings as stated above.
Attempting this will result in damage to the monitor and stand.
1. Power off the TV and turn off your
computer (PC).
2. Connect the audio cable (not included)
from the computer’s Audio OUT jack to the
TV’s VGA AUDIO IN jack.
3. Connect a VGA cable from the computer’s
VGA OUT jack to the TV’s VGA IN jack.
4. Turn on the TV and press the TV/VIDEO
button until PC appears on the TV screen.
5. Turn on your computer and the computer
screen will appear.
NOTES:
1. You must follow the above steps when you
connect between the computer and the
television for the first time; otherwise, the
computer screen may not appear.
2. Refer to the computer’s owner’s manual for
instructions.