Metz Slim TV - Manual (Page 81)

81
36. Copying between AV Devices
Direct recording
Opening the menu
If you wish to copy a recording from one of the
AV devices connected to your TV set (such as a
DVD player) to another connected AV device (such
as a video recorder), you must do this by means
of a direct recording operation. In this case, the
signal arriving at one of the EURO sockets is redi-
rected to the other EURO socket, from where it
can be recorded.
Example: you have a DVD player and a video
recorder connected to the
EURO sockets of the TV set
(see Section 25).
Programming a direct recording
for copying:
• Press the "AV" key and use the corres-
ponding numeric key to select the DVD
player (playback device).
• Press the F2 key.
Briefly pressing F2 executes the func-
tion which is programmed for this
function key (see Section 18.1, "Programming
function keys").
Pressing and holding F2 for about three seconds
displays all functions available for this function
key.
• Press numeric key
ᕪ
to open the
timer menu. The timer window dis-
plays the AV programme position
(DVD player), the current date and a
time window of two hours.
• If two hours is insufficient for the
copying operation, use the numeric
keys to enter a later end time.
• Use the cursor control key ̄ to select
the line "Recording device".
If only one such device exists, it is
F2
ᕪ
2 DVD-Player
1 Videorecor-
der
AV
ᕢ
Recording Yes
Reminder No
Pr 6
SAT 1
Date
01.05.
Start 22:45
End 23:40
VPS no
Recording device
Videorecorder
Change with
:select
:save the timer OK
Select with ᕪ...ᕩ
or .
Confirm with .
OK
– +