Metz Slim TV - Manual (Page 56)

Various TV standards for picture and sound are
used in different countries. If the wrong TV stan-
dard is selected, you will not be able to hear the
sound, or it will be distorted. The TV standard "L"
also uses a different standard for transmission of
the picture. The TV standard must therefore be set
before you execute a station search.
The TV set is set in the factory to the TV standard
B/G.
Setting the TV standard 2)
• Press the "MENU" key to open the
TV menu.
• Press the red key ® to open the menu
"Configuration".
• Use the corresponding numeric key
(in the example:
¿
) to select "Analo-
gue TV".
• The menu item "Search settings" is
already selected.
• Press the "OK" key and, in the setting window,
use the - + key to select the desired TV standard.
• Press the "OK" key to confirm your selection.
• Press the "EXIT" key to close the TV menu.
56
Opening the menu
22.1 Setting Stations
TV-Standard 2) for analogue stations
Terr. station search
Search settings
2)
Function for F3
Function for F2
Function for F1
EURO sockets
DVB-C
DVB-T
Analog-TV
Country
Language
Operating
TV standard 2) B/G
F1 ➔
MENU
ᕤ
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
2) Possible only on sets equipped with this
function.
Change with
Accept value with
OK
OK
EXIT
– +