Metz Slim TV - Manual (Page 40)

40
18. Special Functions
Picture-in-Picture
Opening the menu
The picture-in-picture (PIP) function can only be
used to display the picture from an AV device.
Activating the PIP function:
• The F1 key is pre-programmed with
the picture-in-picture function.
• You can use the cursor control keys
̇ ̈ to move the PIP picture on the
screen. The last position to which this
picture was set is saved.
• By pressing the "OK" key, you can
set the frame of the PIP picture to
active (red) or inactive (white).
• The contents of the PIP picture can be
changed only if its frame is active
(red). If this is the case, you can use
the numeric keys or the "P+/P-"
rocker key to select a different AV
programme position.
If you wish to display the picture from a connected
AV device as a picture-in-picture, press the "AV"
key and then use the numeric keys to select the
desired AV device.
• Pressing the red key swaps the contents of
the two pictures.
• Pressing the green key causes the PIP picture
to expand to fill the screen and terminates the
PIP function.
• To close the PIP picture, press the "EXIT" key.
If a rec*ording has been programmed in
the timer menu, activating the PIP function
displays the programme which is being
recorded.
☞
F1