Metz Slim TV - Manual (Page 77)

77
31. Operation without the
Remote Control
Operation without the remote control is provided
as an emergency measure in case the batteries of
your remote control are exhausted or the remote
control is not readily available.
The local controls (see also Section 35) are loca-
ted behind the flap on the front of the TV set.
To open the flap ...
... pull it open with your fingernail or
... press on the point marked •••.
Switching on
Press the main power switch on the TV set. After
about five seconds, the TV set is switched on with
programme position 1 or the programmed initial
programme position selected.
You can also use the following functions directly
on the TV set, without a remote control. For func-
tions which require further adjustments, the func-
tion remains preselected for ten seconds.
Programme selection:
Press the -/+ buttons.
Volume:
Press and hold the preselection key F or
until the bar display for the volume appears on the
screen. Then press the "-" or "+" button to adjust
the volume.
Contrast:
Press and hold the preselection key F or
until the bar display for the contrast appears on
the screen. Then press the "-" or "+" button to
adjust the contrast.