Metz Slim TV - Manual (Page 93)

93
Direct recording of an
analogue terrestrial
station (received via
roof antenna or
cable) with Data Logic
does not work. • The Data Logic video recorder
is not connected to the roof
antenna or cable outlet with a
suitable cable.
• Connect the Data Logic
video recorder to the
roof antenna or cable
outlet with a suitable
cable.
Data Logic does not
work. • The Data Logic video recorder
with data transfer has not been
registered correctly.
• The Data Logic video recorder
is not connected to the EURO 1
socket.
• The Scart cable does not have
all pins connected through.
• Open the menu "AV
devices" and register
the Data Logic video
recorder as video recor-
der 1 with "Data Logic
On".
• Connect the Data Logic
video recorder to the
EURO1 socket with a
Scart cable.
• Use a Scart cable in
which all pins are con-
nected through.
Problem Possible cause Remedy
General problems
with an external AV
device connected to
the TV set. • The AV device has not been
registered in the TV set.
• Open the menu "AV
devices", select the devi-
ce with the cursor, set
the signal types
(OUT/IN) correctly and
press the "OK" key.
Make sure that you con-
nect the AV device as
shown in the connection
diagram.