Special functions, Recording a programme with a timer, Setting a timer manually for a recording – Metz Slim TV User Manual
Page 41
41
18. Special Functions
Normal/Speech
Opening the menu
Opening the menu
Selection of "Normal" or "Speech" is des-
cribed in Section 12.1, "Tone Settings".
In this menu, you can temporarily select
"Normal" or "Speech". The selection
remains active until you switch to another
programme position, switch to standby
mode or switch the TV set off completely.
This setting has no effect of the setting des-
cribed in Section 12.1, "Tone Settings".
Special functions 2
1
Normal/Speech
9
Timer-Overview
0
Direct recording
F2
If you wish to record a programme which your
video recorder or DVD recorder cannot receive
directly because it does not have a suitable tuner
(such as DVB-T or DVB-C), you can use the "Timer
overview" to make such programmes available to
the recording device.
Setting a timer manually for a recording:
• Press the F2 key. If you press F2 brie-
fly, the function programmed for F2
(see Section 18.1, "Programming the
function keys") is executed.
If you hold down F2 for about two
seconds, all possible selections are
displayed.
• If all possible selections are displayed,
press the corresponding numeric key
(in the example:
¾
) to open the timer
menu.
• If a timer already exists, press the F1 key.
• The cursor is located at the left of the first line
"Record". The number of subjects and sections
Recording
Yes
Reminder
No
Pr ---
Date
--.--.
Start
--:--
End
--:--
VPS
No
Recording device
Videorecorder
Timer
Preview
17:23
Mon Tue Wed Thu
Fri
Sat Sun 29.04.
Change with .
:select.
:save the timer.
F2
F1
ᕩ
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
18. Special Functions
Recording a programme with a timer
OK
– +
– +