Metz Slim TV - Manual (Page 29)

29
12.1 Sound Settings for
Programmes via TV Menu
Some of the menu items are not available
in a 2 ** menu.
Forced mono
It may happen that your TV set switches from
mono to stereo in the middle of a programme, alt-
hough no stereo sound is being transmitted. This is
generally caused by the local reception condi-
tions. If you activate "Forced mono" for the selec-
ted programme position, all programmes from this
station will be reproduced in mono.
Activating forced mono:
• Press the "MENU" key.
The TV menu appears on the screen.
•Press the blue key . The menu
"Picture and sound" and the menu
item "General picture settings" are
pre-selected.
• Use the corresponding numeric key (in
the example:
¿
) to select "Sound set-
tings for Pr.".
• Use the corresponding numeric key (in the
example:
»
) to select "Forced mono".
• In the setting window, use the - + key to change
the setting.
• Press the "OK" key to save the new settings.
• Press the "EXIT" key to close the TV menu.
Individual sound settings can also be made
in the station table.
☞
☞
Opening the menu
MENU
Forced mono
Tone settings
Volume correction
Sound set,.prog.pos
Sound settings, gen.
Pict.set.,prog.posn.
Pict. settings, gen.
Forced mono on
Change with
Accept value with.
ᕤ ᕣ
OK
EXIT
OK
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
– +