Metz Slim TV - Manual (Page 60)

60
For a manual station search, you must know the
channel number or the frequency of the station
you wish to find.
Executing the manual search
• Press the "MENU" key to open the TV menu.
• Press the red key to open the menu "Confi-
guration".
• Use the corresponding numeric key (in the
example:
´
) to select " DVB-T".
• In the setting window "Antenna", you can switch
the supply voltage for an antenna on or off with
the - + key (see also page 59).
• Use the corresponding numeric key
(in the example:
·
) to select "search
settings".
• In the setting window, use the - + key
to select "All", "FTA only" or "FTA +
CICAM" (see also page 59).
• Press the "OK" key and use the cor-
responding numeric key (in the exam-
ple:
¿
) to select "Manual search".
• In the setting window, use the nume-
ric keys to enter the channel number
or the frequency.
If you know further data of the desired
station, select the menu item "Mod. parameter"
and use the - + key to change the setting there to
"Manual". You can then enter further data.
• After input of the station data, use the cursor
control key to select the menu item "Station
search" and press the "OK" key to confirm your
selection.
The station settings are saved.
22.2 Setting Stations
Manual DVB-T station search
Opening the menu
General settings
Manuall search
Automatic search
Search settings
Antenna
Function for F3
Function for F2
Function for F1
EURO sockets
DVB-C
DVB-T
Analog-TV
Country
Language
Operating
Channel 05 Frequency177.500 Mhz
Mod.-Parameter auto. Start station search
Change with
Accept value with
F1 ➔
MENU
ᕥ
ᕤ
Transmission 8k Mode
Modulation64 QAM
Mod. Parameter
manuell
OK
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
– +