Muratec MFX-2830 - Manual (Page 454)

In This
Case...
In This Case... ● Maintenance and Troubleshooting
5-34
When Power Failure Occurs
■
What happens when power failure occurs
During phone call Phone conversation can continue.
During fax transmission Transmission will be cut off. When the power comes back, your machine will start to trans-
mit again automatically if it was in memory transmission. If it was a real-time transmis-
sion, it will not start again. Transmit again.
During fax reception Reception will be cut off. When the power comes back, the machine will print the pages re-
ceived completely before the power failure.
During copying
During printing a list Printing will stop.
■
During the power failure
Copy Cannot copy.
Fax transmission Cannot transmit.
Fax reception Cannot receive.
Making phone calls Cannot make phone calls.
Receiving phone calls Phone calls can be received with the handset.
*The handset is optional.
Main unit operation
Memory backups
Image data stored in memory is held under the following conditions even if a power failure occurs
or the unit is shut down.
· Image data stored in memory is held for the following period of time. Note that the power of the
machine should be turned ON for at least 48 hours beforehand.
· The time it takes for back up image data depends on the size of the memory.
32 MB: Approx. 34 hours (standard memory) 64 MB: Approx. 17 hours (if the 32 MB Memory Extention kit is
installed)