Muratec MFX-2830 - Manual (Page 440)

In This
Case...
In This Case... ● Maintenance and Troubleshooting
5-20
Cleaning ADF glass/Document glass
1
Open the platen cover.
Document glass
ADF glass
2
Dip a soft cloth in a bit of water
and wring it out thoroughly be-
fore wiping the ADF glass and
document glass.
3
Close the platen cover.
Dirty ADF glass will cause a black line or other unwanted markings printed in copies or the re-
ceived document by receiving party. To maintain high picture quality, clean the ADF glass and
document glass at least once a month.
Dirt is heavy...
When the dirt on the surfaces is heavy, wipe them with a cloth dipped in a small quantity of a mild cleaning solution,
and then wipe them again with a cloth dipped in water and thoroughly wrung out.
In this case
Do not use benzene or thinner as cleaning agents which could damage plastic and paint.
Important