Muratec MFX-2830 - Manual (Page 32)

1-14
Getting
Started
Getting Started
Main unit part names and functions
■ Main unit
12
13
14 15 16
17
18
No. Name Function
1 Right Cover This is opened to remove jammed paper or to change the drum cartridge.
2 Right Cover Release Lever (C1) Pull up on this to open the right cover.
3 Right Lower Cover This is opened to remove jammed paper.
4 Bypass Tray This is used to copy or print special or custom paper, such as postcards and
envelopes. (see page 1-26)
5 Extension Tray This is extended when loading large-size paper.
6 Paper Loading Guide This is adjusted to match the width of the paper to prevent skewing.
7 Slide Plate This is pulled when the paper in the bypass tray jams.
8 Slide Plate Knob (C3) This controls the movement of the slide plate.
9 Right Lower Cover Release
Lever
(C2)
Pull up on this to open the right lower cover.
10 Paper Level Indication Window The red shown in this area increases as the level of the paper in the paper
tray decreases.
11 Front Cover (B) This is opened to replace the toner bottle. (see page 5-15)
12 Control Panel This is where the keys and touch screen required for operation are grouped.
13 ADF Cover This is opened when a document jams or to when cleaning the scan area.
14 ADF Cover Release Lever (A1) Pull up on this to open the document cover.
15 Document Guide This supports the document so that it feeds straight.
16 Document Tray This holds the document in the ADF.
17 Document Output Tray This catches originals after they have been scanned.
18 Document Output Extension Tray This is extended when catching long document.
19 USB Port The machine can be used as a printer by connecting it to a computer via a
USB cable.
1
2
11
3
4
5
6
10
7
9
19
8