Maxtor pmn - Manual (Page 8)

4. Installation
1) Camera Connection
Connect the camera to the CAMERA INPUT on the Rear Panel of the system.
2) Monitor Connection (Composite Connection Method)
Connect the monitor to the MONITOR OUT on the Rear Panel of the system
5
VIDEO
LENS
VIDEO
DC
AC24V/DC12
V.P
DC
LEVEL
Rear part of CAMERA
VIDEO A
IN OUT
VIDEO C
IN OUT
VIDEO B
IN OUT
5. Operation SCHEDULE REC SETUP : 3
26
Records according to schedule by day or a day of the week. Two recording time spans can be set for a
day and a day of the week respectively. In total, 4 recording time spans can be set in a day.
DVMR system records just as you set if you set SCHEDULE REC SETUP, and DVMR system records 24
hours a day if you do not set SCHEDULE REC SETUP.
1. Scheduled Recording for a day:
3) Set recording time for START and END with [ENTER] button. Recording time increases by 30 minutes
whenever [ENTER] button is pressed.
2) Press [MODE] button to be ready for editing. Then move to the location for change using direction button.
4) After set START and END time for a day and set ON/OFF using [ENTER] button.
If you set ON, it means DVMR system records in time span you set. If you set OFF, DVMR system
stop recording in the time span you set.
5) After set all data, press [MODE] button once more to memorize settings you set in the system.
NOTICE : To move the cursor in SCHEDULE RECORD SETUP menu , RESET should be set at NONE.
6) RESET is used to delete previously set recording schedule.
(NONE : Does not reset DATE : deletes only selected date ALL : deletes all)
2. Scheduled recording by a day of the week :
first select WEEK in MODE of SCHEDULE REC SETUP by pressing [ENTER] button.
7) When all input is ended, press [MENU] button to come back to SCHEDULE REC SETUP.
Set recording time for each day of the week as the procedure for Scheduled Recording for a day.
Recording is activated on a day of the week at the time set in advance. To set schedule for a day of the week,
Select DATE, and move to the date by pressing [MODE] button, and press [ENTER] button to delete.
ALL deletes all recording schedule.
SCHEDULE REC SETUP
NONE : No reset
DATE : Reset selcted
date only
All : Reset all.
DATE : Set by day
WEEK : Set by a day
of the week
SCHEDULE REC SETUP
SYSTEM SETUP
DISPLAY SETUP
CAMERA TITLE
TIME/DATE SETUP
ALARM/MOTION
SETUP
RECORD SETUP
TCP/IP SETUP
MISCELLANEOUS
FACTORY DEFAULT
BUZZER SETUP
ID/PW SETUP
SCHEDULE REC SETUP
PANTILT CMD SETUP
HDD INFORMATION
MARK IMAGE SETUP
PRODUCT ID
YY-MM-DD
02-07-06
SAT
02-07-07
SUN
02-07-08
MON
02-07-09
TUE
START
00:00
00:00
00:00
00:00
00:00
00:00
00:00
00:00
-
-
-
-
-
-
-
-
- END
24:00
24:00
24:00
24:00
24:00
24:00
24:00
24:00
ON/OFF
ON
ON
ON
ON
ON
ON
ON
ON
ALL ABOUT IMAGE RECOGNITION & PROCESSING ALL ABOUT IMAGE RECOGNITION & PROCESSING
Procedure Procedure
Notice : This DVMR system automatically detects video system of camera you connected
to the unit when you boot DVMR system first. It is not necessary to set video
system separately, and DVMR system set at NTSC or PAL system automatically
when you boot the system.
SELECT , ENTER OR MODE
MODE : DATE RESET : NONE
1) Press ENTER button to enter into SCHEDULE REC SETUP menu. In the sub-menu, you are requested
to select MODE or RESET. To first set up, select DATE or WEEK by pressing [ENTER] button.
VCR CH1 CH2 CH3 CH4
MONITOR LOOP
Co
m
m Po
rt
V
G
A
VCR CH1 CH2 CH3 CH4
MONITOR LOOP
Co
m
m P or t
V
G
A
Notice : Connect camera or monitor to DVMR unit while DC power switch on the front panel
is off.