Maxtor pmn - Manual (Page 16)

2) After you press [FRZ] button, press [SEQ] button to advance single field forward or backward. To move field by
field forward or backward, press [LEFT] or [RIGHT] button.
5. Operation
1. Playback setup
1) Press [PLAY] button to begin playback.
2) Display screen as shown on the right will appear
3) Press [PLAY] button again to start playback
from start of recording.
2. GOTO time setting
1) If you want to start playback from the point you want, set time and date.
2) Using [UP], [DOWN], [LEFT] and [RIGHT] button, set desired time from which you want to start
playback.
(To start from a specific time, first set the
GO TO time before press [PLAY] button.)
3) Then press [PLAY] button to start palyback.
NOTICE : During playback or setting GO TO time, recording is stopped
3. Pausing and single frame advanced
1) During playback, press [FRZ] button to pause. (Will replay when pressed once more)
After you press [FRZ] button, ‘PAUSE” message is displayed on top of screen.
13
NOTICE : When value that is out of the range of start or end of data is entered, it starts from start of
recording.
4) To come back to recording mode.
press [PLAY] button again.
NOTICE : When value is in the range of START and END, but there is no recorded pictures at the set time,
playback starts from the picture which is the nearest to set time.
START : 2002/APR/12 AM 07:40:38
END : 2002/APR/20 PM 02:11:56
GOTO : 2002/APR/15 AM 00:00:00
Time recording
started.
Time recording
ended.
Indicate time to be
played. Search(GOTO) mode
5. Operation
ACTIVE CH SETUP :
COLOR BAR TEST : COLOR BAR CHART is generated. 5
3
has problem, it is indicated as LOSS.
Used for adjusting the monitor
18
CAMERA ACTIVE SETUP
CHs
CH1
CH2
CH3
CH4
SELECT , PRESS ENTER
CAMERA ACTIVE SETUP
LIVE
ON
ON
ON
ON
STATUS
ACTIVE
ACTIVE
ACTIVE
ACTIVE
REC
ON
ON
ON
ON
: SCREEN POSITION
ADJUSTMENT
ENTER : DEFAULT POSITION
CAM1 CAM2
CAM3 CAM4
SCREEN POSITION ADJUSTMENT
2. LIVE : Decides whether to show LIVE screen image or not.
With direction button, move to item to be changed, and press [ENTER] button to select ON or OFF.
1. STATUS : In normal cable condition it is indicated as ACTIVE, and when the cable is disconnected or
3. REC : Decides whether to record relevant channel or not.
SCREEN POSITION SETUP 4
Use direction button to move the full screen according to the user s needs.
Some monitors are used with wrong settings and show pictures not in the middle of display unit. In this
case you need adjustment, and you can do it in SCREEN POSITION SETUP.
2
3
ALL ABOUT IMAGE RECOGNITION & PROCESSING ALL ABOUT IMAGE RECOGNITION & PROCESSING
1
Play Play 3.
3) It is available both in live view mode and playback mode. To exit PAUSE mode, press [SEQ] button and
[FRZ] button.