Maxtor pmn User Manual

Page 17

3. CAMERA SETUP

5. Operation

COLOR SETUP : Adjust Camera Image

TITLE SETUP : Input TITLE of each camera

CH NUMBER
BRIGHTNESS
CONTRAST
SATURATION
HUE
GAIN

(-31~ +32)
(-31~ +32)
(-20~ +32)
(-31~ +32)
(-31~ +32)

: Select camera
: Adjust screen brightness
: Adjust color contrast
: Adjust color saturation
: Adjust color hue
: Adjust image signal level

1) Use [LEFT] or [RIGHT] button to select CHANNEL and
press [ENTER] button.

2) Go to channel you want to change using [LEFT] or [RIGHT]
button. Then change title of selected channel using
[UP] or [DOWN] button.

CAMERA SETUP

COLOR SETUP
TITLE SETUP
ACTIVE CH SETUP
SCREEN POSITION SETUP
COLOR BAR TEST

SELECT , PRESS

2
3

CAMERA SETUP

CAMERA COLOR SETUP

CH NUMBER
BRIGHTNESS
CONTRAST
SATURATION
HUE
GAIN

SELECT , PRESS

CAMERA COLOR SETUP

1
+2
- 2
- 8
+0
+0

When modification is finished, press [MENU] button to
come back to the MAIN MENU.

5. Operation

6. MARK IMAGE (Internal backup) SETUP

5. Display Enlargement.

2) Press [ZOOM] button, during Playback or PAUSE mode.

3) The display will enlarge by 200%

4) Use [up], [down], [left] AND [right] buttons to move the area
enlarged.

5) Press [ZOOM] button again to go back to Playback or FRZ
mode.

NOTICE : Execute when it is in FULL SCREEN of each

channel.

1) Choose camera by pressing numbers button.

When [SPEED] button is pressed, ZOOM does not
work.

4. Playback Speed Setup

1) During playback , press [SPEED] button.

2) Display screen as on the right will appear.

3) Use [LEFT] or [RIGHT] button to move forward (FF) or

4) Use [UP] or [DOWN] button to select the speed rate.

(High speed up to x60 and slow speed up to 1field/60sec is
is available.)

During Playback, press [MARK] button and choose pictures you want to store separately using [LEFT] and
[RIGHT] button. Pictures you marked shall be protected from being overwritten.

2002/APR/12 AM 07:40:38
1X PLAY SPEED

CAM1

CAM2

CAM3

CAM4

We recommend you to install 7200rpm EIDE hard disk drive.

5400rpm EIDE hard disk drive is not good enough to retrieve

ZOOM

Press(X2 Enlargement)

Press

Chosen

1X PLAY SPEED
2X PLAY SPEED
4X PLAY SPEED
8X PLAY SPEED

16X PLAY SPEED
32X PLAY SPEED
60X PLAY SPEED

Chosen

1X PLAY SPEED
1/2 PLAYSPEED
1/4 PLAYSPEED
1/8 PLAYSPEED
1/16 PLAYSPEED
1/32 PLAYSPEED
1/60 PLAYSPEED

Playback speed

PLAYBACK SPEED SETUP

backward (REW).

ALL ABOUT IMAGE RECOGNITION & PROCESSING

recorded data in high speed playback mode.

CAMERA TITLE SETUP

SELECT , PRESS ENTER

0 1 2 3 4 5 6 7 8 9 . , < > ( ) - = A B C D

E F G H I J K L M N O P Q R S T U V W X Y Z

a b

c d e f g h I j k l m n o p q r s t u v w x y z

CH1
CH2
CH3
CH4

(CAM 1 )
(CAM 2 )
(CAM 3 )
(CAM 4 )

Right adjustment of each element in COLOR setup will increase picture quality displayed.

We recommend you to adjust each element of COLOR SETUP for cameras and monitor to be connected
to the DVMR unit for better appearance.

MARK IMAGE FUNCTION is very unique and useful function, because it enables you to store pictures you
selected in playback mode separately and protect those pictures from being erased even though HDD is in the
process of being overwritten.

For detail, refer to MARK IMAGE SETUP/MISCELLANEOUS SETUP in page 28.