Minicom Advanced Systems RJ-45 - Manual (Page 18)

SMART IP LINK
Figure 13 The Video settings
The parameters have the following functions:
Brightness - Brightness control.
Contrast Red/Green/Blue- RGB contrast control.
Black level - Sets the intensity of the color black.
Clock - Sets the horizontal frequency for a video line, this depends on the video
mode. Different video cards may require different values. The default settings and
auto adjustment procedure should be adequate for all common configurations. If not
change this setting together with the sampling phase.
Phase - Sets the phase for video sampling.
Horizontal Offset - Moves the picture in a horizontal direction.
Vertical Offset - Moves the picture in a vertical direction.
- Resets mode to factory defaults.
- Resets all modes to factory defaults.
- Saves changes.
- Undoes changes that have not yet been saved.
27. Mouse synchronization
The correct operation of the host mouse depends on the Host system mouse settings.
IP Link works with accelerated mice and is able to synchronize the client with the
host mouse pointer.
The following may prevent proper mouse synchronization.
• Special vendor-specific Mouse drivers disrupt the synchronization process.
Ensure these are not on the host system
• Windows XP has a setting 'Enhance pointer precision'. Deactivate it.
17