Minicom Advanced Systems RJ-45 - Manual (Page 10)

SMART IP LINK
10. Connecting the Power management option
Figure 6 gives an overview of the Power management option.
Server
KVM
Serial
External power
Switch -
IPM 220-L Inline
Power module, or
3rd party unit
Ke
yb
d
Mo
us
e
10
0T
Vi
de
o
Se
ria
lA Pa
ra
llel
Se
ria
lB
Mains
www
.m
in
ic
o
m
.c
o
m
ETHERNET SERIAL
POWER
100-250 VAC 50/60 Hz
RST
USER COMPUTER
Figure 6 Power management option
11.
12.
Connecting to Ethernet
The Ethernet connector on the IP Link can be used either for a 100 Mbps 100BASE-
TX connection or for a 10 Mbps 10BASE-T connection. The Ethernet adapter
adjusts to the appropriate operation mode automatically.
10 Mbps Connection
For 10BASE-T Ethernet networks, the Fast Ethernet adapter uses Category 3, 4, or 5
UTP/FTP cable. To establish a 10 Mbps connection, the cable must be connected to
a 10BASE-T hub. Ensure the cable is wired appropriately for a standard 10BASE-T
adapter. Align the RJ-45 plug with the notch on the adapter's connector and insert it
into the adapter's connector.
9