Minicom Advanced Systems RJ-45 - Manual (Page 12)

SMART IP LINK
17. Configuring system via local console
There are two ways of doing this:
(A) Connect the NULL modem cable to the computer and to IP Link’s Serial
port. Use any Terminal software to connect to IP Link. The screen shots
below use Windows Hyperterminal.
1. Choose Start/Programs/Accessories/Communications/Hyperterminal.
2. When prompted enter a name and click OK. The Connect To box appears.
See Figure 7.
3. Fill in the connection details. Select COM 1 in the Connect using box and
click OK. The COM 1 properties box appears. See Figure 8.
Figure 7 Connect To box
Figure 8 COM 1 Properties box
4. Set the port settings to the following values:
• Bits/second - 115200
• Data bits - 8
• Parity - None
• Stop bits - 1
• Flow Control - None
5. Click OK. The Hyperterminal appears. See Figure 9.
11