Motorola C290 - Manual (Page 90)

76 Section 2F: Using Contacts
3. Select an available speed dial location and press Assign
(left softkey).
To assign a speed dial number to an existing phone number:
1. Display a Contacts entry. (See “Finding Contacts Entries”
on page 72.)
2. Press Options (right softkey).
3. Highlight Edit and press
r
. (The contact details are
displayed.)
4. Highlight Speed Dial below the phone number for which
you wish to assign a speed dial number, and press
r
.
5. Select an available speed dial location and press Assign
(left softkey).
Editing a Contacts Entry
1. Display a Contacts entry. (See “Finding Contacts Entries”
on page 72.)
2. Press Options (right softkey).
3. Highlight Edit and press
r
. (The contact details are
displayed.)
4. Highlight the part of the entry you wish to edit (press
the navigation key left or right to change tabs, and up or
down to select details on each tab) and press
r
.
5. Add and/or edit the desired information and press
r
.
Note: If you try to assign a speed dial location that is already
assigned to another phone number, a dialog will appear
asking if you wish to replace the existing speed dial
assignment. Select
Yes to assign the location to the new
phone number and move the old number to another speed
dial location.