Mercedes-Benz 2004 E 320 - Manual (Page 363)

363
Practical hints
Replacing bulbs
Side marker lamp bulb
̈ Switch off the lights.
̈ Carefully slide lamp towards front.
̈ Remove rear end first.
̈ Twist bulb socket counterclockwise
and pull out.
̈ Pull bulb out of the bulb socket.
̈ Insert new bulb in socket.
̈ Reinstall bulb socket, push in and twist
clockwise.
̈ To reinstall lamp, set rear end in
bumper and let front end snap into
place.
Replacing bulbs for rear lamps
Tail lamp assemblies
The tail lamps are equipped with HiP bulbs.
License plate lamp
1 Screw
̈ Switch off the lights.
̈ Loosen both screws 1 and remove
lamp.
̈ Replace the tubular lamp and reinstall
lamp.
̈ Retighten the screws.
!
To prevent scratches, we recommend
that you have the sidemarker bulb re-
placed by an authorized
Mercedes-Benz Center.
Warning!
G
The bulbs in the tail lamps cannot be re-
placed individually. The tail lamp bulbs are
under pressure and could explode during an
attempt to replace them.
If the tail lamps are malfunctioning, have
them exchanged at an authorized
Mercedes-Benz Center.