Mercedes-Benz 2004 E 320 - Manual (Page 198)

198
Controls in detail
Power windows
̈ Turn SmartKey in the starter switch to
position 1 or 2 or press the KEY-
LESS-GO* start/stop button once or
twice.
Opening the windows
̈ Press switch 2 to 5 to the resistance
point.
The corresponding window will move
downwards until you release the
switch.
Closing the windows
̈ Pull switch 2 to 5 to the resistance
point.
The corresponding window will move
upwards until you release the switch.
Fully opening the windows
(Express-open)
̈ Press switch 2 to 5 past the resis-
tance point and release.
The corresponding window opens com-
pletely.
Fully closing the windows
(Express-close)
̈ Pull switch 2 to 5 past the resis-
tance point and release.
The corresponding window closes com-
pletely.
If the upward movement of the window is
blocked during the closing procedure, the
window will stop and open slightly.
i
You can still operate the windows when
the key is in starter switch position 0 or
has been removed:
ț until the driver’s or front passenger
door has been opened
ț though for no more than five min-
utes
Warning
G
If you pull and hold the switch up when clos-
ing the window, and upward movement of
the window is blocked by some obstruction
including but not limited to arms, hands, fin-
gers, etc., the automatic reversal will not op-
erate.
Warning!
G
Driver’s door only:
If within five seconds switch is again pulled
past the resistance point and released, the
automatic reversal will not operate.