Mercedes-Benz 2004 E 320 - Manual (Page 144)

144
Controls in detail
Control system
Synchronizing the time
This function can only be seen on vehicles
with COMAND and navigation module*.
̈ Move the selection marker with
the
æ or ç button to the
Time/Date submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
Time sync. with head unit .
The selection marker is on the current
setting.
̈ Press æ or ç to select the de-
sired setting.
Set time (hours)
This function can only be seen when syn-
chronization is switched off.
̈ Move the selection marker with
the
æ or ç button to the
Time/Date submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
Clock, hours .
The selection marker is on the hour set-
ting.
̈ Press æ or ç to set the hour.
̈ Confirm by pressing reset button.
Set time (minutes)
This function can only be seen when syn-
chronization is switched off.
̈ Move the selection marker with
the
æ or ç button to the
Time/Date submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
Clock, minutes .
The selection marker is on the minute
setting.
̈ Press æ or ç to set the minutes.
̈ Confirm by pressing reset button.