Mercedes-Benz 2004 E 320 - Manual (Page 298)

298
Operation
Maintenance
Clearing the service indicator
You can clear the service indicator
̈ Press the j button on the multi-
function steering wheel.
The service indicator is cleared and the
standard display appears in the multi-
function display.
Service term exceeded
If you have exceeded the suggested ser-
vice term, you will see the following mes-
sage in the multifunction display:
Service A exceeded by XXXXX miles (km)
Service A exceeded by XXX days
Service A exceeded by X day
Any authorized Mercedes-Benz Center will
reset the service indicator following a com-
pleted service.
Calling up the service indicator
̈ Switch the ignition on.
The standard display of the control sys-
tem appears (
୴ page 129).
̈ Press button k or j on the mul-
tifunction steering wheel until the
FSS PLUS indicator appears in the mul-
tifunction display.
Resetting the service indicator
In the event that a service on your vehicle
is not carried out by an authorized
Mercedes-Benz Center, you can reset the
service indicator yourself.
̈ Switch the ignition on.
The standard display of the control sys-
tem appears (
୴ page 134).
̈ Press button k or j on the mul-
tifunction steering wheel until the
FSS PLUS indicator appears in the mul-
tifunction display.
̈ Press the reset button ( ୴ page 22) for
about five seconds.
i
If the battery is disconnected, the days
of disconnection will not be included in
the count shown by the service indica-
tor. To arrive at the true service dead-
line, you will need to subtract these
days from the days shown in the ser-
vice indicator.
Do not confuse the service indicator
with the engine oil level indicator
:.