MITSUBISHI ELECTRIC WD-60C8 - Manual (Page 15)

2. TV Setup 15
Controlling A/V Receiver Sound Volume
Use one of the methods below to control sound volume from
an A/V receiver.
With a Standard TV Setup
Recommended Method: • Program the TV’s
remote control for your A/V receiver and enable the
Audio Lock feature. See page 68.
Program the TV’s remote control for your A/V
•
receiver and set the TV remote’s slide switch to the
AUDIO position to control A/V receiver volume. Set
the switch back to the
TV position to control the TV.
Use the remote control that came with the A/V •
receiver.
With NetCommand IR Control
736 or 835 Series TV. Set up NetCommand control of
the A/V receiver’s volume functions in the
Inputs > AVR
menu. The TV’s remote will then control A/V receiver
volume. See page 58.
With NetCommand for HDMI (CEC-Enabled
HDMI A/V Receiver)
The TV’s remote control may control some functions
of the A/V receiver. See Appendix E, “NetCommand
HDMI Control of CEC Devices,” page 77.