Monessen Hearth Direct Vent Gas Insert IDV490NVC - Manual (Page 31)

57D0016 31
GLASS REPLACEMENT
1. Put on gloves. Remove glass frame from insert by releasing two latches on bottom of insert and lifting the door up and
off the unit. See Figure 40.
2. Carefully remove broken glass.
3. Slide new glass frame back down onto insert and fasten two latches. See Figure 40.
Always use gloves when handling
broken glass.
CAUTION
Make sure the glass panel edges
do not touch any metal parts during
thermal expansion.
W
ARNING
Figure 40 - Removing Door
NOTE: Use only original replacement parts.
Glass
Frame
Latches