Motorola simplefi - Manual (Page 90)

Advanced TCP/IP Settings
You will normally never need to modify TCP/IP settings for s i m p l e f i .
However, if for example, you use hard-coded IP addresses for your
wireless network, your network has a proxy server, or the IP address
for your wireless adapter changes occasionally (as described earlier
in this appendix), you may want to set your PC and
s i m p l e f i to use
static IP addresses and configure proxy server settings.
SimpleServe Console enables you to configure the following
advanced TCP/IP settings:
• Dynamic or static IP address settings
• P roxy server settings
Set simplefi IP Address
1 To set the IP address of your s i m p l e f i, right-click on the s i m p l e f i
icon in the SimpleServe Console. Select the
P ro p e rt i e s menu
i t e m .
2 Click on Network Settings .
3 Enter a range of IP addre s s e s to assign s i m p l e f i. SimpleServe
assigns s i m p l e f i an IP address from this range during discovery.
APPENDIX D CONFIGURING IP A D D R E S S
I N F O R M AT I O N
APPENDIX D, CONFIGURING IP ADDRESS INFORMATION 76
Figure D-3
Figure D-4