Motorola simplefi - Manual (Page 32)

SECTION 3 I N S TA L L ATION
SECTION 3, INSTALLATION 18
Device Discovery
This section describes the procedure to connect your s i m p l e f i and
PC. This procedure is known as device discovery.
NOTE:
s i m p l e f i is set to discovery mode at the factory. Your s i m p l e f i may
not be in discovery mode, for example, if you are already using
s i m p l e f i and intend to install s i m p l e f i and SimpleWare software on
another PC.
If s i m p l e f i is not in discovery mode (does not display the following
text), see Appendix C, Troubleshooting for information on how to
reset your s i m p l e f i to discovery mode.
Looking for PC…
simplefi is in
discovery mode.
1 After re s t a rting your PC, a dialog box prompts you to enter the
last three characters of your s i m p l e f i serial number. You can
find the s i m p l e f i serial number on a sticker located on the
bottom of your s i m p l e f i. You can also find the s i m p l e f i serial
number on the inside cover of the User Guide, and on the
Getting Started guide.
B e f o re device discovery, exit other Windows applications.
If you do not use device discovery to connect your s i m p l e f i and
PC after installing SimpleWa re, you can perf o rm device
d i s c o v e ry later by clicking on the
add device b u t t o n in the
S i m p l e S e rve Console.