Motorola i275 - Manual (Page 30)

21
Channels and Codes
Exiting MOTOtalk
To set your phone to network mode when
MOTOtalk is active:
1 From the MOTOtalk idle screen, press m .
2 Scroll to MT Options and press O .
3 Select Exit MOTOtalk and press O .
Switching to Network Please Wait displays. After
a few seconds, the network idle screen appears.
Talk Range
Phones used in MOTOtalk mode should be a
minimum of 6 feet apart to maximize performance
and improve transmission range.
Channels and Codes
Your phone has 10 channels and 15 codes.
Channels are divided into sets of frequencies that
allow you to make and receive MOTOtalk calls.
Other parties may also be talking on the same
channel.
Codes help minimize interference from unwanted
messages and other disturbances when you are on
the same channel as others.
To have a conversation, all parties must be on the
same channel and code. For private MOTOtalk
calls, the person you are calling must be in
MOTOtalk and set to the same channel to receive
your call.
Note: When making a code call, all parties that
are on your code and channel can hear
your conversation.
To set a channel:
1 From the MOTOtalk idle screen, press A
under Edit.
2 Scroll to Channel.
3 Press
A under Edit.
4 Select a channel.
5 When you are finished, press
A under Back
to return to the MOTOtalk idle screen.
To set a code:
1 From the MOTOtalk idle screen, press A
under Edit.
2 Scroll to Code.
3 Press
A under Edit.
4 Select a code.
5 When you are finished, press
A under Back
to return to the MOTOtalk idle screen.