Memorex MVD4543 - Manual (Page 53)

52
TROUBLESHOOTING GUIDE (DVD SIDE) (CONTINUED)
SYMPTOM
DVD
The unit does not start playback.
Some functions do not operate as
stated.
Selected language is not being
shown in the subtitles, or spoken.
Subtitles are not working properly.
Angle cannot be changed.
VCD (VIDEO CD)
No menu playback.
PROGRESSIVE SCAN
No picture.
POSSIBLE SOLUTION
Insert DVD correctly.
Make sure to insert a DVD; “DVD
VIDEO” will appear in the display.
Place the disc on the disc tray correctly
inside the guide.
Clean the disc.
This is normal; try another function.
This is normal; try another disc.
This is normal; try another disc.
Turn the subtitles on.
Try another disc, or wait for a scene
which allows a different camera angle.
Try another VCD.
Slide the PROGRESSIVE SCAN switch
to the OFF position if your set is not
compatible, the picture should
reappear.
POSSIBLE CAUSE
DVD not inserted, or inserted upside-down.
A non-playback disc is inserted.
The disc is not placed in the guide.
The disc is dirty.
Some features and functions are not
available on all discs.
If the audio or subtitle language does not
appear on the disc, then the initial setting
will not be seen/heard.
Subtitles appear only when the discs
contain them.
Subtitles not turned on.
Angles may not be recorded on the disc
(see disc jacket/case), or they may only
be recorded on certain scenes.
The VCD inserted does not have the
playback control.
If you connect a TV that is not compatible
with a progressive scan signal and set
the PROGRESSIVE SCAN switch to ON,
you will not be able to see any picture.