Vcr setup menu – Memorex MVD4543 User Manual

Page 25

VCR SETUP MENU

The SETUP MENU lets you customize the VCR section by allowing you to set

various options, such as clock, program, channels and more.

While in the VCR mode (VCR button pressed first) enter the SETUP MENU by

pressing the SETUP button 1. Use the Navigation (√,®,π,†) buttons 2 to

navigate through the menus/screens and press the OK button 3 to select the

highlighted option.

To Exit the SETUP MENU, press the SETUP button 1.

Enter the VCR mode and the Setup screen as described

above; the Setup menu will appear. Press the OK button to

select Clock Set; the Clock Set menu will appear.

Enter two digits for the month, two digits for the day and two

digits for the year using the Number buttons. As each

number is pressed, the cursor will move to the right. When

finished, the hour digits will blink.

TO SET THE DATE AND TIME

Enter two digits for the hour and two digits for the minute

using the Number buttons. As each number is pressed, the

cursor will move to the right. When finished, the AM/PM

setting will blink.

Press the Number 1 button 1 for AM or the Number 2 button
2

for PM. When finished setting the time, press the SETUP

button 3 to exit.

NOTE: You can also use the Navigation (π,†) buttons to

select between AM and PM.

NOTE:

You can change the Date and Time setting while in the Clock Set menu by using the Navigation (√,®) button to select and

then using the Number buttons or Navigation (π,†) button to change.