Mercedes-Benz 2003 CL 500 - Manual (Page 98)

98
Controls in detail
Seats
̈ Press switch 1.
The rear head restraints will fold back-
ward.
Placing rear head restraints upright
̈ Pull the rear head restraint upright until
it locks into position.
Head restraint tilt
The rear head restraint angle can be ad-
justed manually.
Power head restraints, rear*
You can fold the rear head restraints back-
ward or upright using the head restraint
folding switch. The switch is located:
ț on the front center console:
̈ Make sure the ignition is switched
on.
All the lamps in the instrument clus-
ter should light up
̈ Press switch 1 briefly.
The rear head restraints will fold
backward.
̈ Press switch 1 and hold.
The rear head restraints will fold up-
right.
ț on the rear center console:
̈ Make sure the ignition is switched
on.
All the lamps in the instrument clus-
ter should light up
̈ Push upper half 1 of switch.
The rear head restraints will fold up-
right.
̈ Push lower half 2 of switch.
The rear head restraints will fold
down.
!
Make sure that the head restraints en-
gage when adjusting them manually.
Otherwise, their protective function
cannot be assured.