Mercedes-Benz 2003 CL 500 - Manual (Page 305)

305
Practical hints
Replacing bulbs
Parking and standing lamp bulb
̈ Switch off the lights.
̈ Open the hood ( ୴ page 237).
̈ Press ends of housing cover 1 tab to-
gether and remove cover.
̈ Pull out the bulb socket with the bulb.
̈ Pull the bulb out of the bulb socket.
̈ Insert a new bulb in the socket.
̈ Reinstall the bulb socket.
̈ Align housing cover and click into
place.
Side marker lamp bulb
̈ Switch off the lights.
̈ Carefully slide lamp towards rear.
̈ Remove front end first.
̈ Twist bulb socket counterclockwise
and pull out.
̈ Pull bulb out of the bulb socket.
̈ Insert new bulb in socket.
̈ Reinstall bulb socket, push in and twist
clockwise.
̈ To reinstall lamp, set rear end in
bumper and let front end snap into
place.
Replacing bulbs for rear lamps
Tail lamp assemblies
1 Backup lamp (black socket)
2 Turn signal lamp (white socket)
3 Tail, standing and parking lamp (red
socket)
4 Driver’s side: tail, parking and rear fog
lamp
Passenger’s side: tail and parking lamp
(red socket)