Mercedes-Benz 2003 CL 500 - Manual (Page 140)

140
Controls in detail
Control system
Convenience submenu
Access the CONVENIENCE submenu via the
SETTINGS menu. Use the CONVENIENCE sub-
menu to change the settings for a number
of convenience features. The following
functions are available:
Setting key dependency
Use this function to set whether the mem-
ory settings for the seats, the steering
wheel, the mirrors, and the automatic cli-
mate control should be stored separately
for each key (
୴ page 105).
̈ Move the selection marker with
the æ or ç button to
the
CONVENIENCE submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
SETTINGS KEY-DEPENDENT .
The selection marker is on the current
setting.
̈ Press æ or ç to set key depen-
dency to
ON or OFF .
Activating easy-entry/exit feature
Use this function to activate and deacti-
vate the easy-entry/exit feature. When
the feature is activated, the steering wheel
and driver’s seat will move back to facili-
tate exiting when you
ț remove the key from the starter switch
ț open the driver’s door.
However, the engine must be turned off.
Function Page
Set key dependency 140
Activate easy-entry/exit feature 140
Set parking position for exterior
rear view mirrors
142
Set fold-in function for exterior
rear view mirrors 142