Mercedes-Benz 2003 CL 500 - Manual (Page 337)

337
Technical data
Fuels, coolants, lubricants etc.
Fuels, coolants, lubricants etc.
Capacities Vehicle components and their respective
lubricants must match. Therefore use only
brands tested and recommended by us. Please refer to the Factory Approved Ser-
vice Products pamphlet, or inquire at your
Mercedes-Benz Center.
Model Capacity Fuels, coolants, lubricants etc.
Engine with oil filter CL 500
CL 55 AMG
CL 600 8.5 US qt (8.0 l)
7.9 US qt (7.5 l)
9.5 US qt (9.0 l) Recommended engine oils
Automatic transmission CL 500
CL 55 AMG
CL 600 9.1 US qt (8.6 l)
9.1 US qt (8.6 l)
8.1 US qt (7.7 l) MB Automatic Transmission Oil 1
1 MB part no. 001 989 21 03 10
Rear axle 1.7 US qt (1.6 l) Hypoid gear oil SAE 85 W 90
Hydraulic system for ABC approx. 4.2 US qt (4.0 l) MB Hydraulic fluid
Power steering approx. 1.1 US qt (1.0 l) MB Power Steering Fluid
(Pentosin CHF 11S)
Front wheel hubs approx. 2.1 oz (60 g) each High temperature roller bearing grease
Brake system 0.7 US qt (0.7 l) MB Brake Fluid (DOT 4+)
Cooling system CL 500
CL 55 AMG
CL 600 approx. 12.1 US qt (11.5 l)
approx. 15.3 US qt (14.5 l)
approx. 15.85 US qt (15 l) MB 325.0 Anticorrosion/Antifreeze