Towing eye bolt (vehicle tool kit):installing, Installing towing eye bolt – Mercedes-Benz 2003 CL 500 User Manual
Page 321
321
Practical hints
Towing the vehicle
Installing towing eye bolt
Front of vehicle
1 Cover on right side of front bumper
Removing cover
̈
Press mark on cover in direction of ar-
row.
̈
Lift cover off to reveal threaded hole for
towing eye bolt.
The towing eye bolt is supplied with the
tool kit (located in the storage compart-
ment under the trunk floor).
̈
Screw towing eye bolt in to its stop and
tighten with lug wrench.
Reinstalling cover
̈
Fit cover and snap into place.
Rear of vehicle
2 Cover on right side of rear bumper
Removing cover
̈
Pull cover in the direction of the arrow.
̈
Fold cover down to reveal threaded
hole for the towing eye bolt.
The towing eye bolt is supplied with the
tool kit (located in the storage compart-
ment under the trunk floor).
̈
Screw towing eye bolt in to its stop and
tighten with lug wrench.
Reinstalling cover
̈
Fit cover and snap into place.