Mercedes-Benz 2003 CL 500 - Manual (Page 102)

102
Controls in detail
Seats
Seat ventilation*
The switch is located on the door. Seat
ventilation can be activated manually with
the electronic key in starter switch posi-
tion 1 or 2, or by the summer opening fea-
ture (
୴ page 171). The blue indicator
lamps on the switch show the ventilation
level selected:
1 Seat ventilation switch
̈ Make sure the ignition is switched on.
All lamps in the instrument cluster light
up.
Switching on seat ventilation
̈ Press switch 1.
Three blue indicator lamps above the
switch light up.
̈ Continue pressing switch 1 until the
desired seat ventilation level is
reached.
Switching off seat ventilation
̈ Press switch 1 repeatedly until all indi-
cator lamps go out.
Level
3
Three indicator lamps on
2 Two indicator lamps on
1 One indicator lamp on
off No indicator lamp on
i
The seat ventilation is automatically set
to the highest level if activated via sum-
mer opening feature (
୴ page 171).
!
If one or all of the lamps blink on the
seat ventilation switch, there is insuffi-
cient voltage due to too many electrical
consumers being switched on. The seat
ventilation switches off automatically.
The seat ventilation will switch back on
again automatically as soon as suffi-
cient voltage is available.