English, 5 preference – Marantz SR6003 User Manual

Page 41

ENGLISH

BASIC

CONNECTIONS

BASIC OPERA

TION

ADV

ANCED

CONNECTIONS

SETUP

ADV

ANCED

OPERA

TION

TROUBLESHOOTING

OTHERS

NAMES AND

FUNCTION

SETUP

5 PREFERENCE

• Zone A Setup :
• Zone B Setup :

“5-1 ZONE SETUP” (see page 39)

• DC Trigger Setup :

“5-2 DC TRIGGER SETUP” (see page 39)

Select

“Preference” from Main Menu with the

3 or 4 cursor buttons and press the ENTER
button.

Preference

Zone A Setup

Zone B Setup

DC Trigger Setup

Optical Output

Standby Mode

Audio

HDMI Audio

HDMI Lip Sync

Return

: Up / Down

Enter : Select

Exit : Exit

: Rec

: Economy

: Main

: Enable

: Disable

Select the desired menu with the

3 or 4 cursor

buttons and press the ENTER button.

Optical:

Select when using equipment with optical digital
output.
Rec:

Select when recording to a CD
recorder or MD recorder.
(See page 12)

Zone B:

Select when using ZONE B.
(See pages 21, 39, 64)

Standby:

When this is set to “Economy”, you can reduce the
power consumption when the unit is in the Standby
mode. When “Economy” is selected, “TV Auto”
and “RS-232C” are disabled when the unit is in the
Standby mode.

Audio:

In the Audio mode, Dolby Digital and DTS output
is set to either “Main” or “Sub”. Select “Audio” with
the

1 or 2 cursor buttons, then select Main ↔ Sub

↔ Main+Sub with the 1 or 2 cursor buttons.

Preference

Zone A Setup

Zone B Setup

DC Trigger Setup

Optical

Standby Mode

Audio

HDMI Audio

HDMI Lip Sync

Return

: Up / Down

Enter : Select

Exit : Exit

: Rec

: Economy

: Main

: Enable

: Disable

Zone A Setup

Audio Source

Sleep Timer

Stereo / Mono.

Zone Pre Out

Volume

Mode

Level

Zone Speaker Out

Volume

Mode

Level

Return

: Up / Down

: Change

Enter :

Exit : Exit

: DVD

: Off

: Stereo

: Off

: Variable

: -90dB

: * * *
: * * *
: * * *

Zone B Setup

Audio Source

Sleep Timer

Zone Digital Out

Return

: Up / Down

: Change

Enter :

Exit : Exit

: DVD (Dig.2)

: Off

DC Trigger Setup

Trigger

System Error!!

DVD

VCR

DSS

AUX1

TAPE

CD/R

7.1ch Input / AUX2

Tuner

USB Audio

Return

: Up / Down

: Change

Enter :

Exit : Exit

: Disable

: * * *
: * * *
: * * *
: * * *
: * * *
: * * *
: * * *
: * * *
: * * *
: * * *

HDMI Audio:

This setting determines whether to play back
audio input to the HDMI jacks through the unit or
output it through the unit to a TV or projector.
Enable: The audio input to the HDMI jacks can

be played back by this unit.

In such case, audio signals are not
output to the TV or projector.

Through: The audio input to the HDMI jacks is not

output from the speaker terminals of the
unit. Audio data is output directly to the
TV or projector. This setting is used to
listen to audio on a multi channel TV,
etc.

HDMI Lipsync:

Video signals may take longer to process than
audio signals depending on the connected video
equipment.
When the unit is connected to TV or Projector
supporting Auto Lipsync Correction in HDMI
1.3a, audio and video can be automatically
synchronized using this function.
Use the

1 or 2 cursor buttons to switch between

Enable and Disable.
Enable: Auto Lipsync Correction is used to

synchronize audio and video.

Disable: Deactivates this function.

Note:

• This function is not available when the unit is

connected to equipment that does not support HDMI
1.3a or Auto Lipsync Correction. For details, check
the user’s manual of the connected equipment.

• If this function is unavailable, you can use the

regular Lipsync function to synchronize audio and
video. (See page 45)

After you complete this portion of the setup, move the
cursor to “Return” with the

3 or 4 cursor buttons and

press the ENTER button.