Setup – Marantz SR6003 User Manual

Page 27

ENGLISH

BASIC

CONNECTIONS

BASIC OPERA

TION

ADV

ANCED

CONNECTIONS

SETUP

ADV

ANCED

OPERA

TION

TROUBLESHOOTING

OTHERS

NAMES AND

FUNCTION

SETUP

After all components are connected, initial setup
must be performed.

GRAPHICAL USER INTERFACE MENU
SYSTEM

This unit incorporates the graphical user interface
menu system, which makes various operations
possible by using the cursor (

3, 4, 1 , 2) and

ENTER buttons on the remote controller or on the
front panel.

Note:

• To view the graphical user interface displays, make

certain you have connected the MONITOR OUT
jack on the rear panel to the composite, S-Video,
component video or HDMI input of your TV or
projector. (See page 13, 14)

Press

the

AMP button on the remote controller.

(This step is not needed when operating the
setup menus from the unit.)

Press

the

MENU button on the remote controller

or press the MENU button on the front panel.
The “Main Menu” of the GUI menu system is
displayed.

There are 6 items in the “Main Menu”.

Select the desired sub-menu with the

3 or 4

cursor buttons and press the ENTER button.
The display will change to the selected sub-
menu.

(1) Move the cursor to “Input Setup” in the Main

Menu.

(2) When the

1 or 2 cursor button is pressed to

display the (key) icon on an item, the item
concerned is locked.

To exit from the GUI menu system, press the

EXIT button, or move the cursor to EXIT and
press the ENTER button.

SR6003 FRONT BUTTON CONTROL

RC003SR BUTTON CONTROL

UP button

RIGHT button

DOWN button

MENU button

Press this button to display the GUI

menu system.

EXIT button

Press this button to exit the GUI menu system.

LEFT button

ENTER button