MITSUBISHI ELECTRIC CP900E - Manual (Page 50)

50
OUTPUT
MONI R-SUB 0
MONI B-SUB 0
LIVE SEL ANA/DIG
CONVERT OFF/ON
MEMORY SYNC
EXT/INT
OUT SYNC AUTO/USER
0.3V/TTL>
NEGA/POSI>
< RGB SOG OUT OFF/ON>
OUTPUT Output signal setting display
MONI R-SUB Adjusts red-subcontrast on the monitor. Red is added with
]
and
blue is added with [ .
MONI B-SUB Adjusts blue-subcontrast on the monitor. Blue is added with
]
and
yellow is added with [ .
LIVE SEL(Live select) Switches the monitor display routes of input signal at LIVE
mode with DISPLAY OFF. Selects to display input signal, or the
reflection of image and adjustment on the monitor.
ANA(Analog) Displays the image of input signal on the monitor.
DIG(Digital) Displays the reflection of image and adjustment.
CONVERT This function is to output the signals which selected at INPUT
in MAIN MENU to Video output terminal/RGB output terminal/
S-video output terminal.
OFF Outputs to the same output terminal as the input terminal.
ON Outputs to Video output terminal/RGB output terminal/S-video
output terminal.
MEMORY SYNC Selects the Sync. signal for displaying memory image.
EXT Selects Sync.output signal, and displays memory image.
INT Selects Sync.input signal, and displays memory image.
• Selecting Sync.output signal may not display memory image correctly depending
on the connection. In this case, set SYNC. to “INT”.
• When selecting INT and displaying memory image, comment is not displayed.
OUT SYNC Selects depending on the output of Sync signal.
AUTO Selects the same signal as the one selected in IN SYNC.
USER Selects by user.
OUT SYNC Selects the output level of H+V Sync signal of RGB signal.
0.3V 0.3 Vp-p
TTL TTL level
OUT SYNC Selects the polarity of H+V Sync. output signal of RGB signal.
Set the polarity according to the monitor connected.
See the operation manual of the monitor for the polarity.
NEGA Negative polarity
POSI Positive polarity
RGB SOG OUT Selects the sync.signal output from RGB analog output
terminal on the rear panel.
OFF Outputs Composite sync. signal only.
ON Outputs Sync. On Green signal.
KEY SET Button function setting display
KEY LOCK Makes the function on the remote control unit buttons invalid.
OFF All buttons on the remote control unit are available.
ON The function on the remote control unit buttons, except MEMORY,
PRINT, MONITOR and MEMORY PAGE are not available. When
pressing MENU button, KEY SET menu is displayed. When
pressing MENU button, only selecting OFF/ON of KEY LOCK is
available.
KEY SET
KEY LOCK OFF/ON
MEM&PRN OFF/ON/R1/R2
MEM&STOP OFF/PART/PAGE
MEM&MONI OFF/ON
KEEP MONI OFF/ON
AUTO CLEAR OFF/MEM/AFTER PRN
CLEAR KEY PART/PAGE/ALL
ADJUSTMENTS & SETTINGS (SERVICE MENU)