Graco Inc. 1095 HI - Manual (Page 37)

Displacement Pump Replacement 1095/1595/Mark V
311365G 37
8. Ratchet pump door forward.
9. Open pump door.
10. Pull out pump pin and place in pin holder.
Installation
1. Adjust piston rod with pin holder to pull out
piston rod. Tap piston rod on hard surface
to push in piston rod.
2. Push pump collar flush with bearing
housing ledge to be able to close pump
door.
3. Slide pump into connecting rod. Push
pump pin until it is fully retained.
Note: Pin will snap into position.
ti6377a
ti7331a
ti7327a
ti6325a
ti5492a
ti7328a
ti6378a