Graco Inc. 309445 - Manual

309445
Rev. E
To find your local Graco authorized service
center:
D Call us at 1–800–690–2894
D
Visit our website at www.graco.com
INSTRUCTIONS–PARTS LIST
Important Safety Instructions
D Read all warnings and instructions
in this manual. Save these
instructions.
Pressure Roller with 20”
Heavy Duty Extension, EvenFlow
t
Roller
Frame and Contractor
t
Inline Valve
– For the rolled application of architectural paints and
coatings –
Model 245397, Series C
D 20 in. (50 cm) Heavy-Duty Extension
D
9 in. (23 cm) EvenFlow
t
Roller Frame
D 1/2 in. (13 mm) Nap Roller Cover
D
Contractor
t
Inline Valve
3600 psi (24.8 MPa, 248 bar) Maximum Fluid Inlet Pressure *
The best operating pressure is the lowest pressure that provides
an even paint supply to the roller and typically does not exceed
300 psi (2.1 MPa, 21 bar). *
CAUTION
Never leave water in the pump, inline valve, or roller frame.
Doing so could cause corrosion and damage from freezing.
For storage, flush the system with Graco Pump Armor
t or
mineral spirits/paint thinner.
GRACO INC.ąP.O. BOX 1441ąMINNEAPOLIS, MNą55440-1441
ECOPYRIGHT 2001, GRACO INC.
Graco Inc. is registered to I.S. EN ISO 9001