Grandstream Networks GXP-2000 - Manual (Page 38)

GXP-2000 User Manual
Grandstream Networks, Inc.
- 39 -
5.2.5 Rebooting the phone from remote
The administrator of the phone can remotely reboot the phone by pressing the “Reboot”
button at the bottom of the configuration menu. Once done, the following screen will be
displayed to indicate that rebooting is underway.
Grandstream Device Configuration
STATUS BASIC SETTINGS ADVANCED SETTINGS
Your configuration changes have been saved.
They will take effect on next reboot.
All Rights Reserved Grandstream Networks, Inc. 2004
At this point, user can relogin to the phone after waiting for about 30 seconds.
5.3 Configuration through Central Provisioning Server
Grandstream GXP-2000 can be automatically configured from a central provisioning
system.
When GXP-2000 boots up, it will send TFTP or HTTP request to download
configuration files, there are two configuration files, one is “cfg.txt” and the other is
“cfg000b82xxxxxx”, where “000b82xxxxxx” is the MAC address of the GXP-2000.
For more information regarding configuration file format, please refer to the related
Grandstream documentation.
The configuration files can be downloaded via TFTP or HTTP from the central server.
A service provider or an enterprise with large deployment of GXP-2000 can easily
manage the configuration and service provisioning of individual devices remotely and
automatically from a central server. GAPS (Grandstream Automated Provisioning
System) uses enhanced (NAT friendly) TFTP or HTTP (thus no NAT issues) and other
communication protocols to communicate with each individual GXP-2000 for firmware
upgrade, remote reboot, etc.