Grandstream Networks GXP-2000 - Manual (Page 26)

GXP-2000 User Manual
Grandstream Networks, Inc.
- 27 -
End User
Password This contains the password to access the Web Configuration
Menu. This field is case sensitive.
IP Address There are two modes under which the GXP-2000 can operate:
• If DHCP mode is enabled, then all the field values for the
Static IP mode are not used (even though they are still
saved in the Flash memory.) The GXP-2000 will acquire its
IP address from the first DHCP server it discovers from the
LAN it is connected.
• To use the PPPoE feature the PPPoE account settings need
to be set. The GXP-2000 will attempt to establish a PPPoE
session if any of the PPPoE fields is set.
• If Static IP mode is enabled, then the IP address, Subnet
Mask, Default Router IP address, DNS Server 1 (primary),
DNS Server 2 (secondary) fields will need to be
configured. These fields are set to zero by default.
Speed Dial There are 7 speed dial fields that can be configured:
• Name field is used to identify the person is? calling in LCD
when pressing the corresponding key.
• UserID field is the number configured.
Time Zone This parameter controls how the date/time will be displayed
according to the specified time zone.
Daylight Savings
Time This parameter controls whether the displayed time will be
daylight savings time or not. If set to Yes, then the displayed time
will be 1 hour ahead of normal time.
Date Display
Format Allow user to choose among the following three formats:
Year-Month-Day
Month-Day-Year
Day-Month-Year
In addition to the Basic Settings configuration page, end user also has access to the
device Status page. The following is a snap shot of the device Status page. Details will
be explained next.