Grandstream Networks GXP-2000 - Manual (Page 23)

GXP-2000 User Manual
Grandstream Networks, Inc.
- 24 -
Menu Item Menu Functions
- RESET -
Display “ – RESET --”, please be very CAREFUL here
• Press Menu without key in anything, phone will function
the same as power cycle / reboot
• Key in the physical / MAC address on back of the phone,
Press Menu, phone will be reset back to FACTORY
DEFAULT setting, all your setting will be erased and
gone. Refer to Section 7 for complete details.
Others
When phone is powered on and time is displayed
• Press ‘↓’ or ’↑’, Display “ ring [4] ”, press ‘↓’ or ’↑’
again to hear and adjust the ring tone volume, from 0 (off)
to 7 (maximum), to designed one, then off and on the
handset to set the ring tone volume
• Press “SPEAKER” button, or off hook and pick up
handset, press ‘↓’ or ’↑’ to adjust the speakerphone or
phone volume
5.2 Configuration with Web Browser
GXP-2000 series IP phone has an embedded Web server that will respond to HTTP
GET/POST requests. It also has embedded HTML pages that allow a user to configure
the IP phone through a Web browser such as Microsoft’s IE.
5.2.1 Access the Web Configuration Menu
The IP Phone Web Configuration Menu can be accessed by the following URI:
http://Phone-IP-Address
where the Phone-IP-Address is the IP address of the phone. There are two ways to
retrieve this IP address from the phone:
1) When the phone is in on-hook state, press Menu button and then the browsing
arrow keys to check “[2] IP Address”
2) When the phone is in off-hook or speakerphone state, simply press Menu button