Gateway DC-M50 - Manual (Page 84)

84
1 Rotate the function dial to .
• The function dial can be rotated even when the camera is turned on.
2 If the camera is not turned on, slide the power switch to
turn on the camera.
• The power switch returns to the initial position.
• The last recorded image is displayed on the LCD monitor.
3 Press the or key to display the desired image.
• When the key is pressed, the following image is displayed. When the
key is pressed, the preceding image is displayed.
• When the last recorded image is displayed and the key is pressed, the
first recorded image is displayed.
• When the first recorded image is displayed and the key is pressed, the
last recorded image is displayed.
SINGLE-FRAME PLAY
The images recorded on the CF card can be displayed on the LCD monitor one frame at a time.