Specifying the white balance mode – Gateway DC-M50 User Manual

Page 76

SPECIFYING THE WHITE BALANCE MODE

Auto white balance

Automatically adjusts white balance according to light source incident on the CCD.

Daylight mode

Select this mode when taking a picture of the subject illuminated by sunlight.

Light bulb mode

Select this mode when taking a picture of the subject illuminated by an incandescent

light or tungsten light.

Fluorescent mode

Select this mode when taking a picture of the subject illuminated by a fluorescent light.

Cloudy mode

Select this mode when taking a picture of the subject on a cloudy day.

WB Preset mode

Select this mode by using the WB preset white balance setting.

* WB Preset means measuring the white point from a white sheet of paper or card (or

nearby wall), the camera will then record that temperature and use it to correct all

images until you reset it.

This camera has 6 white balance modes.

AUTO

1 Rotate the function dial to and press the MENU button.
• The recording mode menu is displayed on the LCD monitor.