Gateway DC-M50 - Manual (Page 57)

57
Continuous with AF
Continuous shot
Self-timer
Single shot
1 After fixing the camera on a tripod, rotate the function dial
to .
2 Press the ENTER button to change the [DRIVE MODE]
to SELF-TIMER .
The picture is taken about 10 seconds after the shutter-release button is pressed.
SELF-TIMER
3 Determine the image composition while looking into LCD
monitor or viewfinder and adjust the image range and size
with the or key.
• When the key is pressed, the image size becomes large (Telephoto
mode). When the key is pressed, the image range becomes wide
(Wide-angle mode).
1 shot only, even if you keep pressing shutter
release.
Continuous while pressing shutter release.