Gateway DC-M50 - Manual (Page 58)

58
4 Press the shutter-release button half-way down.
5 Press the shutter-release button all the way down to start
timer.
• While the self-timer is functioning, the self-timer lamp in the front of the
camera blinks. As the timer runs down, the lamp blinks faster. Just before the
picture is taken, the lamp lights continuously.
• The beep sounds when the lamp blinks. (The beep can be canceled with the
menu in the SETUP mode.)
• When the subject is not in the center of the frame, use the focus lock function.
(See page 39.)
• After taking the self-timer shot, the camera resets to the single-shot.
* Do not press the shutter-release button when standing in front of the camera. The camera cannot
adjust the focus.
* To interrupt the self-timer shot, rotate the function dial to , PC or SETUP.