Gateway DC-M50 - Manual (Page 122)

122
4 Press the or key so that the desired time for the
auto power off function is highlighted.
• The time for the auto power off function changes in the following order.
5 Press the key to finish the
setting.
The time for the auto power off function can be specified only when using the batteries.
When this camera is connected to the computer, the time for the auto power off function is fixed at 30
minutes automatically regardless of the setting or the power supply.
1 min. (1minute)
3 min. (3 minutes)
5 min. (5 minutes)
10 min. (10 minutes)
30 min. (30 minutes)